This guide walks you through adding Buying Buddy to a website built with HighLevel Ai Studio. Because Ai Studio is driven by an AI assistant, the entire setup is done by handing your Ai Studio assistant a short series of ready-made AI prompts that your Buying Buddy dashboard generates for you. For each step you can simply send your assistant a link and it fetches the full instructions itself, or paste in the full prompt — either way, there is no code to copy or paste by hand.
AI-guided setup only: HighLevel Ai Studio does not use a manual, copy-the-script installation. Instead, you hand your Ai Studio assistant a series of personalized prompts and it installs the Buying Buddy HighLevel Ai Studio plugin and configures your site for you.
Did you install the wrong plugin?
If your site is built with HighLevel Ai Studio, check the list below. If any of these sound like your situation, you installed the JavaScript version and need to use our Migration AI Prompt to make fixes.
❌ Widgets appear on the first page load but disappear after navigating around the site.
❌ You pasted a Buying Buddy <script> tag into your site's custom code or page head.
❌ You added widgets to your pages as <bb-widget> tags (for example <bb-widget data-type="SearchResults">).
❌ Widgets show up sometimes but go blank when you click between pages.
See this support article with full instructions to fix the issue and the Ai prompt to use.
What the AI Prompts Set Up for You
The prompts are generated specifically for your account, so the AI assistant already has everything it needs. Setup runs as a five-step flow: three small install prompts, one quick settings entry, and an optional "add recommended widgets" prompt. The install is split into small prompts on purpose — each one gives the assistant a single, focused job, and each prompt first checks that the previous step was completed before it makes any changes.
Two ways to hand over each prompt: For every step, the dashboard shows a Get AI prompt button. Open it and you will see a recommended one-line link you can paste into your Ai Studio assistant — it fetches the full, up-to-date instructions itself, so there is nothing long to copy. If your assistant cannot open the link, the full prompt is shown right below it as a fallback. Both do exactly the same thing.
Step-1 Prompt — Install the Package
- ✅ Installs the Buying Buddy HighLevel Ai Studio plugin into your site
- ✅ Wires the plugin into your site at the top level so widgets can work on every page
- ✅ Confirms your site still builds with no errors
Step-2 Prompt — Create the Foundation Pages
- ✅ Creates your foundation pages — a Results page, a Property Details page, a Market Report page, and a Communities Hub page
- ✅ Adds the required MLS disclaimer site-wide
Step-3 Prompt — Add Search & Get Your Settings
- ✅ Adds a property search form to your home page so visitors can start searching right away
- ✅ Measures Widget Header Offset values if your site has a sticky header
- ✅ Ends with an Action Required Before Previewing summary — your Website Type, your Vibe Preview Domain, and your header offset values
In Step 4 you enter that summary into your dashboard (right on the install page — it takes under a minute). Then the optional Step-5 prompt adds the recommended extras:
Step-5 Prompt — Add Recommended Widgets (optional)
- ✅ A dedicated Search page
- ✅ A Featured Listings page
- ✅ A Home Value lead-capture form
- ✅ A Contact Me form
- ✅ An About Me page
- ✅ A Register / Login bar across the top of your site header
The Step-5 prompt asks before making any changes — it presents the six recommended widgets as a checklist with everything pre-checked (or as a simple numbered list, depending on your assistant), so you just uncheck anything you don't want and confirm. Each new page is added to a single See More.. menu on your site, so all of your Buying Buddy pages are grouped together and easy to find.
Built-in guardrails: Every prompt opens with strict rules for the assistant — it may only add the Buying Buddy items requested, it must not redesign, restyle, or "improve" your site or its styling, and it must never publish your site. Each prompt also ends by listing every file it touched, so you can see exactly what changed. You always preview and publish yourself.
More on the way: The AI prompts are regularly improved, and additional setup options may be added over time — so it is always worth grabbing a fresh copy from your dashboard when you install.
Before You Begin
You need an active Buying Buddy account. The widgets will not load without one, and the AI prompts are personalized to your account. Don't have an account yet? Start a free trial or buy a license.
Set your website type to HighLevel Ai Studio. So the dashboard shows you the correct AI prompts and instructions, confirm your website is set as a HighLevel Ai Studio site in before you start.
Installation Steps
1
Run the Step-1 Prompt — Install the Package
Copy your personalized install prompt and let Ai Studio do the work
The Step-1 prompt installs the Buying Buddy plugin and wires it into your site, then confirms your site still builds cleanly. It creates no pages yet — that is Step 2's job. It does not publish your site — you will preview first and publish yourself when you are ready.
Get the prompt:
- In your Buying Buddy dashboard, go to Installation and Setup
- On the Get Ready tab, confirm your website is set as a HighLevel Ai Studio site
- Open the Install with AI tab, find the Step 1 card, and click Get AI prompt to reveal it
- Copy the recommended link (or the full prompt shown below it) — both are already personalized to your account
Run it in Ai Studio:
- Open your site's AI assistant chat in HighLevel Ai Studio
- Paste the link (or the full prompt) into your assistant exactly as copied, and let it run
- The assistant installs the plugin, confirms the build passes, and tells you to come back for the Step-2 prompt
Paste it as-is. The link and the full prompt both contain the details your account needs to work correctly. Copy and paste without editing.
If the assistant stops and reports something instead: each prompt checks your site before making changes. If it says Buying Buddy is already installed, or that it found an older JavaScript install (and points you to the migration article), follow its message — that is the check working as designed, not an error.
2
Run the Step-2 Prompt — Create the Foundation Pages
Create your Results and Property Details pages and the MLS disclaimer
The Step-2 prompt creates your foundation pages — a Results page, a Property Details page, a Market Report page, and a Communities Hub page — inside your site's existing layout, and adds the required MLS disclaimer site-wide. It first verifies the Step-1 install completed; if not, it stops and tells you to run Step 1 first.
- Back on the Install with AI tab, find the Step 2 card and click Get AI prompt to reveal it
- Copy the entire prompt and paste it into the same Ai Studio assistant chat
- The assistant creates the foundation pages and the disclaimer, then tells you to come back for the Step-3 prompt
Confirm your pages (optional): Once the assistant finishes, you can review the new foundation pages — Results, Property Details, Market Report, and Communities Hub — directly in your Ai Studio site. The assistant also adds a new See More.. item to your site menu with Communities as its first entry; the Results, Property Details, and Market Report pages stay out of the menu because your widgets link to them directly.
3
Run the Step-3 Prompt — Add Search & Get Your Settings
Add the home-page search form and get the values for your dashboard
The Step-3 prompt adds a property search form to your home page and measures your Widget Header Offset values if your site has a sticky header. It first verifies Steps 1 and 2 completed.
- On the Install with AI tab, find the Step 3 card and click Get AI prompt to reveal it
- Copy the entire prompt and paste it into the same Ai Studio assistant chat
- The assistant adds the search form, measures the header offset if needed, and ends with your settings summary
When it finishes: the assistant shows an Action Required Before Previewing summary with three items — your Website Type, your Vibe Preview Domain, and (if your site has a sticky header) your Widget Header Offset values. Keep that summary handy — you will enter those in the next step.
4
Enter the Values from Ai Studio
Enter the details the assistant gives you so your widgets load
When the Step-3 prompt finishes, it shows an Action Required Before Previewing summary. You can enter those values right here on the install page — no need to leave it. Staying on the Install with AI tab, go to the Step 4 card (Enter the values from Ai Studio) and fill in:
- Vibe Preview Domain (optional) — paste the
{projectID}.vibepreview.comdomain the assistant gave you (for example1780794507926176087.vibepreview.com). You only need this if you want to preview your site before publishing. If you don't see widgets displayed, please allow a minute or two. - Widget Header Offset (only if provided) — if your site has a sticky header, the assistant gives you three numbers (Mobile, Tablet, Desktop). Enter them so the Results and Map widgets are not hidden behind your header.
Then click Save Settings. Your Website Type should already be set to HighLevel Ai Studio from the Get Ready tab — if not, set it there first. (You can also manage these values in the full editor under , but you no longer need to leave the install page.)
About the Vibe Preview Domain: Every Ai Studio project has a preview domain with the same syntax — {projectID}.vibepreview.com (for example 1780794507926176087.vibepreview.com). It is a permanent address for previewing your unpublished site — it does not change when you update or republish, so you can safely bookmark it. It is different from the preview domain originally assigned for viewing your published site, so be sure to paste the one the assistant gives you.
Why add it? Adding your Vibe Preview Domain lets the widgets display while your site is still unpublished — both in the full-window preview (the "Open in new tab" icon in your Ai Studio editor; the domain it opens is your Vibe Preview Domain) and in the preview panel shown while you are editing. Allow a minute or two after saving for widgets to appear.
Why this matters: Buying Buddy widgets only load on authorized domains. Until you add your Vibe Preview Domain, widgets will be blank while you preview your unpublished site. Once your site is published to your live domain, widgets load there automatically — no extra step needed.
Seeing "Sorry, this domain is not authorized"? That message means the plugin is working but the address you are viewing has not been authorized yet. To preview unpublished changes, add your Vibe Preview Domain (above). To view the finished site, publish to your live domain.
5
Run the Step-5 Prompt — Add Recommended Widgets (optional)
Add the recommended extras — pages and a login bar
The Step-5 prompt is optional but recommended. Once the install is complete and your settings are entered, run it to add a Search page, Featured Listings, a Home Value form, a Contact Me form, an About Me page, and a Register/Login bar in your site header — all wired into your navigation. Like the install prompts, it does not publish your site.
Get the prompt:
- Back on the Install with AI tab — — find the Step 5 card (Add Recommended Widgets) and click Get AI prompt
- Copy the entire prompt — it is also personalized to your account
Run it in Ai Studio:
- Paste the Step-5 prompt into the same Ai Studio assistant chat
- The assistant presents the six recommended widgets as a checklist with everything pre-checked (or as a numbered list if checkboxes aren't available) — uncheck anything you don't want, then confirm your selection
- The assistant adds the pages you chose to a single See More.. dropdown in your site menu, and (if selected) adds the Register/Login bar across the top of your header
If the header offset changed: Adding the Register/Login bar may change the height of your site header. If it does, the assistant will give you a fresh set of Widget Header Offset values to enter — update them on the Step 4 card, or under .
Where your pages live: All of your Buying Buddy pages — Communities from Step 2, plus any recommended pages you add here — are grouped under one See More.. menu item on your site. That is the easiest place to open and review each page. If you would prefer them somewhere else, or want to rename the menu, you can rearrange your menu at any time — the pages themselves keep working wherever they sit.
6
Enable Property Sharing
Set up social media sharing with correct listing photos
This final step makes sure that when a property is shared on social media, the link shows the correct listing photo and details. Because your Ai Studio site builds listing pages in the browser, this domain-level setup is what gives shared links their proper preview image and information.
To allow visitors to share properties from your website on Facebook and other social media platforms with the correct listing photos and details, you'll need to set up a "bb" subdomain for your domain.
Setup Options: You can use either Cloudflare (recommended for free SSL certificates) or your current domain registrar.
The Social Media Sharing Setup Instructions will guide you through both options.
Next Step:
Note: Your Buying Buddy dashboard has customized instructions for your domain in the Installation and Setup section (Social Share Settings tab) of your Buying Buddy account.Widgets - Installation and Setup : Social Share tab
Verify Your Setup
On your Vibe Preview Domain (or your live site), run a quick end-to-end check:
- Submit a search from the home-page search form — you should land on your Results page with listings
- Click a listing — you should land on your Property Details page showing that property
- Confirm the MLS disclaimer appears on your site
Success: If search, results, property details, and the disclaimer all work, your Buying Buddy installation on HighLevel Ai Studio is complete.
Ready to go live? The AI prompts do not publish your site for you. Once you have verified everything on your Preview domain, publish to your live domain in Ai Studio when you are ready — widgets load there automatically.
Troubleshooting
Widgets appear, then go blank when navigating between pages
This is the classic sign that an older, incorrect installation method was used — a JavaScript snippet added by hand instead of the Ai Studio plugin. That older method is not reliable on Ai Studio. The fix is quick and is also handled by an AI prompt — there are three options, depending on how much you have already built, plus a read-only check you can run first if you are not sure what is on your site: see Fix Incorrect Installation on HighLevel Ai Studio. You can also run these fixes directly from the Setup Utility Prompts tab on the install page — look for the Fix Incorrect JavaScript Installation prompts.
"Sorry, this domain is not authorized"
The plugin is loading, but the address you are viewing has not been authorized on your account yet. To preview unpublished changes, add your Vibe Preview Domain on the Install with AI tab's Step 4 card (see Step 4). To view your finished site, publish to your live domain — it is authorized automatically.
Nothing appears at all
Re-run the setup with a fresh copy of your AI prompts from , and confirm your website type is set to HighLevel Ai Studio. Each prompt checks whether earlier steps completed, so it is safe to paste them again — the assistant will tell you what is missing. If widgets still do not appear, run the Check what Buying Buddy components are installed prompt — it is on the Setup Utility Prompts tab, it changes nothing, and it prints a short report of every Buying Buddy component on your site. Send that report to our support team through your Buying Buddy dashboard and we can tell you exactly what is wrong.
Custom Menu Links
Embed your Buying Buddy Dashboard as a menu item inside HighLevel. Each agent uses their own Embed Key so they see their own private dashboard.
See "Dashboard Embed Key" instructions at the bottom of your User Profile page
Next Steps
Your HighLevel Ai Studio site is now ready for more Buying Buddy features. Consider adding:
- Featured listing galleries for your own properties
- Neighborhood and community pages
- Additional lead capture forms connected to the Buying Buddy CRM
- An interactive map search experience
- Custom styling with Widget Themes
Related Resources
- Fix Incorrect Installation on HighLevel Ai Studio — three ways to fix an older, incorrect install, plus a read-only check that reports what is on your site
- Understanding Foundation Pages
- Widget Overview
- Install Buying Buddy on HighLevel — for standard HighLevel sites and funnels (not Ai Studio)
Need additional help? Contact our support team through your Buying Buddy dashboard.